Assembling Pocket Purifier
Install 4 ‘AA’ batteries in your Pocket Purifier by removing the end cap at the opposite end of the flashlight by sliding it away from the unit.
- Place 2 batteries closest to unit’s edge with negative ends facing out of unit.
- Place to batteries on top with positive end facing out of unit.
Slide end cap over batteries until completely closed.
Replacing Pocket Purifer's Bulb
The unit contains a 4-Watt, T5 Bi-Pin germicidal UV-C bulb. Replacement bulbs are available on our website or by calling (866) 324-2970
To replace bulb, gently remove the protective cover housing the bulb by holding the unit with one hand and pulling on the corner of the housing. This should cause the cover to pop off.
- Using 2 fingers gently grasp one metal end of the bulb and twist until bulb’s connecting pins align with the slot and remove the bulb.
- Place new bulb into slots and turn using 2 fingers grasping the bulb’s metal ends only and twist ¼ turn until bulb snaps into place.
- NOTE: Only grasp bulb by metal end to avoid contact with bulb’s glass and reduction in UV effectiveness from oil on your skin.
- Replace protective housing by snapping back into place over bulb.
- CAUTION: Avoid exposure of eyes and skin to unshielded lamp.
- WARNING: Bulb contains mercury. Manage in accordance with disposal laws. See www.lamprecycle.org or call 1-800-895-8842.